![]() Use black opaque bag wrap if your incubator has windows. Since without light, the likelihood of germination of Trichoderma spores is much lower. Then it is desirable that the blocks are overgrown in complete darkness. If you process the substrate using hydrothermal technology, then its quality is not stable. The overgrown mycelium covered the spots of trichoderma, and after a while the oyster mushroom mycelium ate the mold. After the ninth day, when the party no longer overheated, we closed the doors. We made the substrate by tunnel pasteurization. And it is on these three blocks out of the entire batch of one thousand blocks. Small spots of trichodremia appeared on the bags that hung near the door. I had to open the door at night when it was cool. When it was very hot, my ventilation couldn’t keep the blocks cool. However, according to my personal observations, the light still affects. I read in articles that light does not affect the overgrowth of mycelium. How light affects the overgrown oyster mushroom mycelium In addition, by freeing one of the rooms, you can do preventive chemical treatment before the next load. It is necessary to find a compromise variant of microclimate regulation experimentally.īut it’s still better than having only one incubator – because then you will have bags in one room that have just been made and are almost ripe. Then we have a situation that for the more developed batches loaded first, it is already necessary to change the microclimate, but this cannot be done, because the later batches have not yet overgrown. If the blocks are produced on the farm itself, blocks made within five days can be loaded into each incubator. In farms that grow more than 2 tons of mushroom per month, it is desirable to have at least three incubators. For example, you made (or brought) 500 pieces in one day, set the necessary microclimate parameters, and the whole batch develops evenly, in favorable conditions. The most successful option is a room designed to be loaded in blocks at a time. The enterprise should have several incubators On the floor you can see a groove for water to drain. To the left of the door, at the top is a round recirculation hole. On the iron socket, which is higher, we put on a polyethylene air duct. To the right of the doorway, you can see a round hole for transferring blocks. In the photo: my incubator in the process of repair. Windows in the incubator can be omitted, since mushroom blocks do not need light when overgrowing. It was covered with styrofoam and opened only when necessary. ![]() Therefore, next to the door there was a window for transferring bags. The second door from the incubator should lead to a corridor or directly to the growing chamber.Īt my enterprise, the door led to the yard and we transported the ripe batches for cultivation. If you are making substrate blocks yourself, it is advisable to position the incubator so that it can be accessed directly from the inoculation room. If you humidify the room with open humidification nozzles (under the ceiling or on the walls), excess moisture does not accumulate on the floor, flowing into the groove. Then it will be easy for you to wash the incubator with a jet of water from a hose or Karcher. The floor should be concrete, preferably slightly sloping, with a groove for water drainage. The walls become rough, with cracks in which moisture easily accumulates and molds multiply. It is not afraid of moisture and makes the surface of the walls smooth.Ĭannot be painted with lime. Walls and ceiling can be painted with white facade water-based paint. The incubator room must be plastered with a cement-based mortar so that the walls are even and smooth. Mushroom incubator What repair is needed for the incubator? The process of overgrowing mycelium in the substrate is called incubation. A mushroom incubator is a room for growing oyster mushroom mycelium in a two-zone growing system.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |